Quote:
Originally Posted by evil_genius_180
As I always say, any progress is good progress. The cut out areas look good. Are you using booleans or one of the other tools? Or a combination of tools?
|
I´ve used booleans.
At my first mesh I´ve had nothing booled because MAX had fragmented the mesh until I was going nuts...
(And C4D do that the same way
)
For my surprise, as I´ve made the Connie, I saw that LW didn´t do that.
Quote:
Originally Posted by evil_genius_180
I really like your added pod and roll bar. I'm thinking of doing something like that on the ship I'm designing.
|
I´ve seen it and I like the Pod.
BTW: I have added the impulse-drives of the primary-hull and the 3 Phaserbanks of the ICICLE (not 6). Thats enough with 6 additional Pulsphasers.
My plan is to install 3 Torpedolaunchers at the front-part of the under piece, 6 at the front of the rear-section, and 6 at it´s rear-part. That matches with my Fan-Fiction.
As I´ve read the first time about Alex Jaegers specifications for the AKIRA my first impulse was to ignore that. But than I remembered that the Captain of the ICICLE is a 40 years old Andorian, and he is a "go-getter" - a little bit like James Tiberius Kirk, but mostly cooler (but he COULD also explode like a bomb in some situations and he sometimes did it...
)
So I made this specifications to a part of my FF and gave the ICICLE two warpcores that it could handle this firepower plus the additional armament.
BTW:
Sorry for the double-post - I can´t find a delete-button.