PDA

View Full Version : Wishmaster


scaramanga
April 15th, 2003, 12:42 AM
I kinda put the dangerman on hold since I had a new idea
http://users.pandora.be/2k3/2d/wishmaster.jpg
This is supposed to be a predessor (is this right?) of the Constitution class and had a similar task as the conny. Note that it does not has warp capable shuttle craft.

skyhawk223
April 15th, 2003, 05:32 AM
Interesting design. You going to build it now?

scaramanga
April 15th, 2003, 06:12 AM
http://users.pandora.be/2k3/3D/wishmaster/001.jpg
jup :)

scaramanga
April 15th, 2003, 09:34 AM
Updates!

http://users.pandora.be/2k3/3D/wishmaster/002.jpg

The deflector is just my suggestion for the missing link between the daedalus deflector and the conny's deflector.
http://users.pandora.be/2k3/3D/wishmaster/003.jpg
http://users.pandora.be/2k3/3D/wishmaster/004.jpg

Thomas P
April 15th, 2003, 01:33 PM
The various 'barrel' rings seem heavy. Overall, though, it looks like it will be interesting when done.

Masao
April 15th, 2003, 05:45 PM
I agree with Thomas. The strengthening bands are a bit overdone. This isn't a keg of beer, after all.
That hangerbay is a bit funky too. The cut-out is straight, but should probably follow the hull panel lines at its sides.

skyhawk223
April 16th, 2003, 05:25 AM
Those panel lines on either side of the hangar bay are actually bisecting the sides. Following the hull panel lines as Masao mentioned should address the problem.

scaramanga
April 16th, 2003, 06:20 AM
Dumped a few rings
http://users.pandora.be/2k3/3D/wishmaster/005.jpg
As you can see I've put the shuttlebay immediatelly on the secondary hull. I also did the pannelling
http://users.pandora.be/2k3/3D/wishmaster/006.jpg

scaramanga
April 16th, 2003, 07:03 AM
http://users.pandora.be/2k3/3D/wishmaster/tosdeflector.gif

skyhawk223
April 17th, 2003, 06:52 AM
Interesting beam effect. Can you feather out or blur the edges a little bit?

The shuttlebay we were taling about a couple of posts up is the one on the front of the primary hull. Check out the panel lines and how they bisect the edges of the opening.

scaramanga
April 17th, 2003, 09:04 AM
Originally posted by skyhawk223
Interesting beam effect. Can you feather out or blur the edges a little bit?

The shuttlebay we were taling about a couple of posts up is the one on the front of the primary hull. Check out the panel lines and how they bisect the edges of the opening.

the dark part is not the whole shuttlebay ;) It should be similar to the one on the butt of the ship :)

Hito
April 23rd, 2003, 11:10 AM
I like the primary hull design and i REALLY love the navigational deflector.
And i like the direction youwere going with for the secondaryt hull in the sketches.

I keep revisiting the Daed design and tryting to think of ways t make it more "sexy".