Model Conversions
 

What's up everyone? It's been a while since I posted here, mainly because I forgot about this site. I remembered it yesterday, mainly because once upon a time I uploaded some models here. They were built in Truespace, back when I used that software. Man, it seems like it's been ages. Due to corrupt backups and whatnot, I haven nothing left of my Truespace days and there were at least a couple models I wanted to revisit. But, it's a pill to remember how I did something that I never rendered orthos of. Then it hit me: 3D Gladiators. I uploaded things. :light: So, I raided the models section for stuff that I made and uploaded what seems like a lifetime ago.

But, I don't use Truespace, I haven't used it in years. I use Lightwave. Caligari's .cob format was never an easy one to convert. It isn't well received by other software. I downloaded a converter that wouldn't even import it. I thought I'd gotten somewhere when an online converter seemed to like the format. But, when I exported it to formats that Lightwave would import, the models imported all messed up. (this is why I hate conversions) Finally, I wound up actually finding a download of Truespace 7.61. After figuring out how to do basic stuff like load a mesh from older versions of Truespace, then I had to find a format that Truespace could export to and Lightwave could import. I finally struck paydirt, and this was the result after a bit of fixing nonplanar and flipped faces:

https://evilgenius180.files.wordpres...p001.jpg?w=800

https://evilgenius180.files.wordpres...p002.jpg?w=800

All things considered, I don't think it turned out bad at all. It was built in 2009 using software from 1998 then imported into software from 2018 in 2020.

Obviously, the materials had to be redone, but that was a given. I briefly considered making new textures, but the ones from my original model hold up OK, so I used them. This is a conversion after all, not a remake. The saucer maps are 1900 pixels wide, a lot smaller than the 4k maps I use these days and they're .jpg images instead of .png, but they work fine. The only map I made yesterday was the impulse engine glow map, as I don't have the one that was used originally. I also did new bussard collector guts. I used to fake a lot of that stuff with textures, but that's now how I roll these days. So, I modeled some lights and blades.

After a few hours of messing with materials, this is what I wound up with:

https://evilgenius180.files.wordpres...ty01.jpg?w=800

https://evilgenius180.files.wordpres...ty02.jpg?w=800

https://evilgenius180.files.wordpres...ty03.jpg?w=800

https://evilgenius180.files.wordpres...ty04.jpg?w=800

https://evilgenius180.files.wordpres...ty05.jpg?w=800

So, that's where it sits right now. All fixed up and ready to play with in Lightwave 2018 (or newer.) Since this one went so well and I downloaded some of my other older stuff, I plan to convert some of my other meshes too.

Re: Model Conversions
 

A couple more quick conversions before I go to work. These are both going to need new textures, the ones in the .zip files are way too low resolution for my taste. The Constellation class also isn’t very accurate. It’s my 2nd version, made from a mix of references, including some schematics from Star Trek Fact Files. Those schematics use a mix of the ready room model and filming miniature for reference. I may do some rebuilding to make it more accurate to the filming miniature. The other ship isn’t canon, so it just needs some new textures.

https://evilgenius180.files.wordpres...t-10.png?w=800

https://evilgenius180.files.wordpres...t-10.png?w=800

Note: the blue is just so they show up better against the background.

Re: Model Conversions
 

Cool.
Hope to see this babies in the download-section soon. ;) :D

Re: Model Conversions
 

Sure, I can put the converted version of the Intrepid in the download section. The other two need a lot of love.

Re: Model Conversions
 

hey great to see your back posting art .. :)

Re: Model Conversions
 

Yeah, like I said I forgot about this site. I wasn't even sure if it was still up until I did a search.

Re: Model Conversions
 

it was down for a while, Darrell was looking into it for a time and also dealing with his own PC issues.

Re: Model Conversions
 

Yeah, I think that was probably around the time I dropped off coming here. I sort of remember it being down, then I think I stopped checking to see if it was back up after a while.

Re: Model Conversions
 

Yay... :bounce: :bounce: :bounce:
That sounds fantastic. The INTREPID-CLASS is one of the few classes that I have not in an adequate quality :)

Re: Model Conversions
 

it would be nice to see more members return.
seeing great art and model work.

Re: Model Conversions
 

I have a slight issue with uploading here, there's not a category for uploading the format for Lightwave 2018+. The highest I can select is Lightwave 9+. The issue with that is, Lightwave 2018 does something different and objects saved in its native format won't load into Lightwave 2015 and earlier. I don't know if this is due to materials or what it is. You have to actually export the files into the correct format to load into earlier versions of Lightwave. Sooooooo, I'm not uploading the model here as I can't select the correct version of Lightwave.

However, I already uploaded this model to Dropbox and shared it at SciFi-Meshes, so I'll just give you the Dropbox links to it.

Lightwave 2018+ format: https://www.dropbox.com/s/xpycljd8ki...REPID.zip?dl=0

FBX format: https://www.dropbox.com/s/hr8y9uw2fb...D_FBX.zip?dl=0

Textures: https://www.dropbox.com/s/njwo7eb351...tures.zip?dl=0

The FBX format is (obviously) for use in other software, though it technically would work for earlier versions of Lightwave too. Whichever one you get, be sure to grab the textures too. If anyone needs the model for use in LW2015 and earlier and wants an export to that, just let me know.

Re: Model Conversions
 

Hurra - many thanx for sharing. I´ve downloaded it and I can´t wait to create my first scene with it.:)

I have installed actually both LW-Versions (2019 and 2015) so I can try to export the 2019 version to 2015 (I´ve made this with my F-302 an it worked well).

Re: Model Conversions
 

Yeah, I could have exported it to LW2015 format, but if nobody needs it I won't bother. It sounds like you've got it handled. :)

Re: Model Conversions
 

Sorry - I´ve meant Version 11.5 is installed.
I have converted it into this version and the mesh looks good. After re-texturing and a little work at the materials it should look nearly as good as the original.:)

I´ve made a first beauty-shot with it.
BTW: Is it okay to add the logo of the Terran Empire and some yellow parts to it, for a personal MU-Version (for my WIKI-article about the MU-Class)?

Re: Model Conversions
 

Looks good. :)

Go for it.

Re: Model Conversions
 

Many thanx. :)

I´ve re-textured the LW 11.5 Mesh (no spec-maps yet) and rendered it with LW 11.5. I think, in the end there will be just minor differences between both versions.

Re: Model Conversions
 

Yeah, that's one thing I don't like about backwards conversions, the materials go wonky. When I first started in LW2018, I hated what they'd done with the materials, so I actually converted a ship that I'd started in it to continue in LW10. But, after a while, I did another project and just figured out how the materials worked. Since then, it's been better for me. There are definitely a lot of improvements in LW2018, but I do sometimes miss the way the older versions did things. One nice thing about LW11 and onward is that you don't have to use that stupid dongle. (though, mine is literally sitting right here in front of me)

Re: Model Conversions
 

Okay - but on the other side it was not a big deal to fix the material-problem.
The LW 11.5 version looks okay now.

So I guess some people will have a lot of fun with the FBX-Version, if they are working with MAX, Cinema 4D or Blender.

Re: Model Conversions
 

I opened the FBX version in Blender after I created it, to check it out. It imports OK. Of course, the materials are wrong, but that was expected.

Re: Model Conversions
 

There's always OBJ format.

And welcome back.

Re: Model Conversions
 

I've found in the past that FBX exports with less issues than OBJ.

Re: Model Conversions
 

This plug-in supposedly lets older LW users load up newer LW models - https://www.lightwave3d.com/assets/p...y/lwo3-loader/

I haven't tried it yet, but it is an option.

I'll look into updating the Program listing for uploads to reflect newer versions of LW... maybe even just make it a text field for the user to list what version it is rather than select from a pull down menu.

Re: Model Conversions
 

Nice! I'll have to give that a shot. It would mean reinstalling LW10, but it's worth it to check that out. Fortunately, I have my dongle sitting right here. :)

Re: Model Conversions
 

Tested it with 11.5
Just get an Error-Message.

Re: Model Conversions
 

The Read Me file says it works with LW 2015. That may be the only version it's designed to work with. I'll give it a look in 10 later.

Re: Model Conversions
 

I can confirm that the plug-in doesn't work in Lightwave 10 64-bit.